FixVault
Home › Hummer › 2006 › H2 4D Utility Pickup › Repair and Diagnosis › Body & Frame › Windows › Doors › Repair Instructions › Front Side Door Inside Handle Replacement › Installation Procedure

Installation Procedure

    Fig 1: Front Inside Door Handle
    GM862267Courtesy of GENERAL MOTORS CORP.
  1. Position the door handle in the retention slots.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the fastener (2) retaining the door handle to the door.

    Tighten:  Tighten the fastener to 9 N.m (7 lb ft).

  3. Attach the inside door handle rod retention clip (1).
  4. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  5. Close the door.
About FixVault