FixVault
Home › Hummer › 2006 › H2 4D Utility Pickup › Repair and Diagnosis › Body & Frame › Windows › Doors › Repair Instructions › Front Side Door Window Channel Replacement › Installation Procedure

Installation Procedure

  1. Position the run channel (2) in place inside the door.
    2. Fig 1: Front Door Window Run Channel
    GM839282Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the fasteners (1) retaining the run channel to the door.

    Tighten:  Tighten the fasteners to 9 N.m (7 lb ft).

  3. Install water deflector. Refer to Front Side Door Water Deflector Replacement .
  4. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
About FixVault