FixVault
Home › Hummer › 2006 › H2 4D Utility Pickup › Repair and Diagnosis › Body & Frame › Windows › Doors › Repair Instructions › Front Side Door Window Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: Front Power Window Module
    GM838386Courtesy of GENERAL MOTORS CORP.
  1. Place the window module in position in the door.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 5 fasteners (1) to the window regulator.

    Tighten:  Tighten the fasteners to 9 N.m (7 lb ft).

  3. Connect the window motor electrical connector.
  4. Place the window in the window clamps, and tighten the clamps.

    Tighten:  Tighten the clamps to 9 N.m (7 lb ft).

  5. Operate the window module to inspect for proper operation.
  6. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  7. Install the trim panel. Refer to Front Side Door Trim Panel Replacement .
About FixVault