FixVault
Home › Hummer › 2006 › H2 4D Utility Pickup › Repair and Diagnosis › Body & Frame › Windows › Doors › Repair Instructions › Rear Door Replacement › Removal Procedure

Removal Procedure

  1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  3. Remove the wiring harness. Refer to Rear Side Door Wiring Harness Replacement .
  4. Remove the fasteners retaining the door check link to the body. Refer to Door Check Link Replacement .
    5. Fig 1: Rear Door Fasteners
    GM900718Courtesy of GENERAL MOTORS CORP.
  5. Remove the fasteners (1) retaining the door hinge halves together.
  6. With an assistant, lift up on the door and remove the door from the vehicle.
About FixVault