FixVault
Home › Hummer › 2006 › H2 4D Utility Pickup › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System With TCS › Repair Instructions › Electronic Traction Control Switch Replacement › Removal Procedure

Removal Procedure

    Fig 1: Traction Control Switch & I/P Assembly
    GM793124Courtesy of GENERAL MOTORS CORP.
  1. Remove the center I/P trim panel. Refer to Instrument Panel Center Trim Panel Replacement in Instrument Panel, Gages and Console.
  2. Gently lift the retaining tabs and remove the traction control switch (1) from the instrument panel (I/P) assembly (2).
  3. Disconnect the harness connector from the traction control switch (1).
About FixVault