FixVault
Home › Hummer › 2006 › H2 4D Utility Wagon › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System With TCS › Repair Instructions › Electronic Traction Control Switch Replacement › Installation Procedure

Installation Procedure

    Fig 1: Traction Control Switch & I/P Assembly
    GM793124Courtesy of GENERAL MOTORS CORP.
  1. Connect the harness connector to the traction control switch (1).
  2. Install the traction control switch (1) into the I/P assembly (2).
  3. Ensure that the switch (1) is secure into both retaining tabs.
  4. Install I/P bezel. Refer to Instrument Panel Center Trim Panel Replacement in Instrument Panel, Gages and Console.
About FixVault