FixVault
Home › Hummer › 2006 › H3 Automatic › Repair and Diagnosis › Electrical › Starter › Battery, Charging System And Starting System › Repair Instructions › Battery Box Replacement › Removal Procedure

Removal Procedure

  1. Remove the battery. Refer to Battery Replacement .
  2. Remove the battery cable harness clips (1, 2) from the battery tray.
    3. Fig 1: Harness Clips
    GM1560042Courtesy of GENERAL MOTORS CORP.
    Fig 2: Lower Battery Box
    GM1560054Courtesy of GENERAL MOTORS CORP.
  3. Lift the lower battery box upward from the battery tray.
About FixVault