FixVault
Home › Hummer › 2006 › H3 Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - 3.5L - Introduction (2 Of 2) › Repair Instructions › Accelerator Pedal Position (APP) Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Locating Accelerator Pedal Position APP Sensor
    GM1560064Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the accelerator pedal position (APP) sensor electrical connector.
  2. Remove the accelerator pedal/APP sensor nuts.
  3. Remove the accelerator pedal/APP sensor from the vehicle.
    4. Fig 2: Remove/Install Accelerator Pedal Position APP Sensor
    GM1560065Courtesy of GENERAL MOTORS CORP.
About FixVault