Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of BPMV & Mounting Bracket

Courtesy of GENERAL MOTORS CORP.

Install the BPMV to the mounting bracket.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Tighten the mounting nuts.
Tighten: Tighten the mounting nuts to 8 N.m (71 lb in).
Install the EBCM assembly. Refer to Electronic Brake Control Module (EBCM) Replacement .
Bleed the system. Refer to Hydraulic Brake System Bleeding (Manual) or Hydraulic Brake System Bleeding (Pressure) in Hydraulic Brakes.