FixVault
Home › Hummer › 2006 › H3 Automatic › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pump Bracket Replacement › Removal Procedure

Removal Procedure

    Fig 1: Removing/Installing Power Steering Pump Bracket
    GM1201382Courtesy of GENERAL MOTORS CORP.
  1. Remove the power steering pump. Refer to Power Steering Pump Replacement .
  2. Remove the drive belt tensioner. Refer to Drive Belt Tensioner Replacement for the 3.5L engine.
  3. Remove the power steering pump bracket mounting bolts.
  4. Remove the power steering pump bracket.
About FixVault