Seat Adjuster Replacement - Front

Fig 1: Seat Adjuster Replacement - Front

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the front bucket seat. Refer to Seat Replacement - Front Bucket . Remove the seat cushion trim cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement .
1	Bolt, Seat Back Frame (Qty: 4) Tighten: 25 N.m (18 lb ft)
2	Nut, Seat Cushion Frame Tighten: 25 N.m (18 lb ft)
3	Frame Assembly, Seat Cushion
4	Adjuster Assembly, Seat Tip: If replacing the seat adjuster mechanism, remove the seat position sensor and retain to use on the new adjuster. Refer to Inflatable Restraint Seat Position Sensor Replacement .