FixVault
Home › Hummer › 2006 › H3 Standard › Repair and Diagnosis › Engine Mechanical › Cooling System (Mechanical) › Engine Cooling › Repair Instructions › Fan Shroud Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Fan Shroud
    GM801107Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the fan shroud (3) to the vehicle.
  2. Install the transmission oil cooler lines to the fan shroud retainer.
  3. Rotate the slip ring to the original position.
  4. Install the radiator hose-inlet. Refer to Radiator Hose Replacement - Inlet .
About FixVault