FixVault
Home › Hummer › 2006 › H3 Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls - 3.5L - Introduction (2 Of 2) › Repair Instructions › Fuel Hose/Pipes Replacement - Chassis › Installation Procedure

Installation Procedure

    Fig 1: Clips Attaching Fuel Feed Lines To Transmission
    GM1560089Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel feed line to the clips.
  2. If equipped with a manual transmission, close the retaining clips attaching the lines to the transmission.
    3. Fig 2: Clips Attaching Fuel Feed Lines To Transmission
    GM1560090Courtesy of GENERAL MOTORS CORP.
  3. Install the fuel feed line to the clips.
  4. If equipped with an automatic transmission, close the retaining clips attaching the lines to the transmission.
    5. Fig 3: Fuel Feed Lines
    GM1560094Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the fuel feed line from the fuel tank. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  6. Lower the vehicle.
  7. Install fuel feed line to the clips.
  8. Close the retaining clips (3, 4).
  9. Connect the fuel feed line quick connect (2). Refer to Quick Connect Fitting(s) Service (Metal Collar) .
  10. Engage the quick connect fitting lock clip (1).
About FixVault