FixVault
Home › Hummer › 2006 › H3 Standard › Repair and Diagnosis › External Pages › Different car › Section 29 (Engine Control System - 3.5L (L52) - Introduction) › Repair Instructions › Fuel Rail Assembly Replacement › Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fuel Injector, Clip & O-Rings
    GM351185Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel injectors (3). Refer to Fuel Injector Replacement .
  2. Remove the fuel pressure regulator. Refer to Fuel Pressure Regulator Replacement .
  3. Remove the fuel injector harness from the fuel rail.
About FixVault