FixVault
Home › Hummer › 2006 › H3 Standard › Repair and Diagnosis › External Pages › Different car › Section 44 (Seat System) › Repair Instructions › Lumbar Switch Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement .
  2. Remove the switch bezel from the seat assembly. Refer to Seat Switch Bezel Replacement .
  3. Remove the buttons from the switch (3).
    4. Fig 1: View Of Lumbar Switch & Power Seat Switch
    GM1333646Courtesy of GENERAL MOTORS CORP.
  4. Release the tabs (4) that retain the seat switch (3) to the seat bezel.
    5. Fig 2: View Of Switch Harness
    GM1333639Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the lumbar switch harness (1) from the seat harness.
  6. Remove the lumbar switch from the seat bezel.
About FixVault