Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Spring Hanger Bracket Bolts & Nuts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the shackle assembly to the spring.
Install the shackle nut and bolt to the spring.
Tighten: Tighten the rear shackle nut to 85 N.m (63 lb ft).
Install the shackle nut and bolt to the frame
Tighten: Tighten the shackle nut to 85 N.m (63 lb ft).
Remove the rear axle support.
Lower the vehicle.