FixVault
Home › Hummer › 2007 › H2 4D Utility Pickup › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting › Repair Instructions › Ambient Light Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Upper Trim Pad
    GM816340Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel top cover. Refer to Instrument Panel Upper Trim Pad Replacement .
    2. Fig 2: Aligning I/P & Routing Electrical Harnesses
    GM815925Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector to the ambient light sensor on the underside of the I/P upper trim panel.
    3. Fig 3: Ambient Light Sensor & I/P Top Cover
    GM816338Courtesy of GENERAL MOTORS CORP.
  3. Turn the ambient light sensor 1/4 turn and remove it from the I/P top cover.
About FixVault