FixVault
Home › Hummer › 2007 › H2 4D Utility Pickup › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting › Repair Instructions › Headlamp Switch Replacement › Installation Procedure

Installation Procedure

    Fig 1: Electrical Connector
    GM832807Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors to the headlamp switch.
    2. Fig 2: Headlamp Switch
    GM815923Courtesy of GENERAL MOTORS CORP.
  2. Align and install the headlamp switch to the instrument panel.
    3. Fig 3: I/P Accessory Left Trim Panel
    GM816356Courtesy of GENERAL MOTORS CORP.
  3. Install the instrument panel trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement - Left Side .
About FixVault