FixVault
Home › Hummer › 2007 › H2 4D Utility Pickup › Repair and Diagnosis › Body & Frame › Door Locks › Vehicle Access › Repair Instructions › Endgate Handle Replacement › Removal Procedure

Removal Procedure

  1. Swing the spare tire carrier to the full outward position.
    2. Fig 1: Endgate Trim Bezel
    GM1412524Courtesy of GENERAL MOTORS CORP.
  2. Remove the trim panel bezel from the endgate.
  3. Open the endgate.
    4. Fig 2: Lock Rod Retaining Clips
    GM1428164Courtesy of GENERAL MOTORS CORP.
  4. Release the 2 lock rod retaining clips (4, 5) from the lock rods (1, 3).
  5. Release the lock rods from the handle assembly.
    6. Fig 3: Endgate Handle
    GM1412522Courtesy of GENERAL MOTORS CORP.
  6. Remove the 3 screws from the handle.
  7. Rotate the handle downward.
  8. Remove the handle from the endgate.
About FixVault