FixVault
Home › Hummer › 2007 › H2 4D Utility Pickup › Repair and Diagnosis › Body & Frame › Fixed And MOVEABLE Windows › Repair Instructions › Midgate Window Regulator Replacement › Installation Procedure

Installation Procedure

    Fig 1: Midgate Window Regulator Components
    GM986408Courtesy of GENERAL MOTORS CORP.
  1. Install the window regulator to the midgate.
  2. Connect the window regulator electrical connector (1).
    3. Fig 2: Midgate Window Regulator
    GM1477813Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  3. Install the nuts retaining the window regulator to the midgate.

    Tighten:  Tighten the window regulator nuts to 25 N.m (18 lb ft).

  4. Install the midgate window. Refer to Midgate Window Replacement .
  5. Inspect and adjust the midgate window alignment to the weatherstrip channel. Refer to Midgate Window Replacement .
  6. Install the midgate inner panel. Refer to Midgate Inner Panel Replacement .
About FixVault