FixVault
Home › Hummer › 2007 › H2 4D Utility Pickup › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System With TCS › Repair Instructions › Traction Control Switch Replacement › Installation Procedure

Installation Procedure

    Fig 1: Traction Control Switch & I/P Assembly
    GM793124Courtesy of GENERAL MOTORS CORP.
  1. Connect the harness connector to the traction control switch (1).
  2. Install the traction control switch (1) into the I/P assembly (2).
  3. Ensure that the switch (1) is secure into both retaining tabs.
  4. Install the center I/P trim panel. Refer to Instrument Panel Center Trim Panel Replacement .
About FixVault