FixVault
Home › Hummer › 2007 › H2 4D Utility Pickup › Repair and Diagnosis › Steering › Steering Column › Steering Wheel And Column › Repair Instructions › Turn Signal Multifunction Switch Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Turn Signal Switch Assembly
    GM761439Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to SIR Caution .
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement .
  3. Tilt the column to the CENTER position.
  4. Disconnect the connectors from the turn signal and multifunction switch assembly.
  5. Remove the turn signal and multifunction switch assembly.
  6. Remove 2 pan head tapping screws from the turn signal and multifunction switch assembly.
About FixVault