FixVault
Home › Hummer › 2007 › H2 4D Utility Pickup › Repair and Diagnosis › Steering › Steering Linkage › Repair Instructions › Tie Rod Replacement - Inner › Removal Procedure

Removal Procedure

    Fig 1: Removing/ Installing Inner Tie Rods Ends
    GM865341Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the engine protection shield. Refer to Engine Protection Shield Replacement .
  3. Remove the steering linkage outer tie rod ends. Refer to Tie Rod Replacement - Outer .
  4. Remove the inner tie rod ends using the J 34028  (2). See Special Tools .
About FixVault