FixVault
Home › Hummer › 2007 › H2 4D Utility Pickup › Repair and Diagnosis › Transmission › Transfer Case - BW 4484 › Repair Instructions › Transfer Case Shift Control Module Replacement › Removal Procedure

Removal Procedure

    Fig 1: Transfer Case Shift Control Module
    GM860519Courtesy of GENERAL MOTORS CORP.
  1. Remove the knee bolster. Refer to Driver Knee Bolster Panel Replacement .
  2. Disconnect the shift control module electrical connectors.
  3. Reposition the harness.
  4. Remove the module from the vehicle.
About FixVault