FixVault
Home › Hummer › 2007 › H3 Automatic › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Starter Motor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Starter Wiring
    GM1560047Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold. Refer to Intake Manifold Replacement .
  2. Remove the starter solenoid S terminal nut and disconnect the lead from the starter.
  3. Remove the starter terminal nut (1) and disconnect the positive battery cable (2) from the starter.
    4. Fig 2: View Of Starter Motor
    GM1313646Courtesy of GENERAL MOTORS CORP.
  4. Remove the starter motor nut (1) and bolt (4).
  5. Remove the starter motor (3).
About FixVault