Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Coat Hook & Retaining Screw

Courtesy of GENERAL MOTORS CORP.

Position the coat hook over the retaining clip.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the screw and washer securing the coat hook to the retaining clip.
Tighten: Tighten the coat hook screw to 1.2 N.m (10 lb in).
In replacing the entire coat hook assembly, press the coat hook and the retaining clip as an assembly into the sheet metal opening until the clip locks into position.