Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Fuel Level Sensor

Courtesy of GENERAL MOTORS CORP.

Complete the following in order to install the fuel level sensor to the module assembly:
1. Align the edges of the sensor with the slots in the module.
2. Slide the sensor into position, ensure the locking tab is fully engaged.

Fig 2: View Of Fuel Level Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the fuel level sensor electrical connector to the module.
Install the fuel tank module. Refer to Fuel Tank Module Replacement .