FixVault
Home › Hummer › 2007 › H3 Automatic › Repair and Diagnosis › External Pages › Different car › Section 51 (Disc Brake System) › Repair Instructions › Disc Brake Splash Shield Replacement - Front › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Wheel Hub/Speed Sensor Assembly
    GM1253296Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the wheel hub and speed sensor. Refer to Wheel Hub/Speed Sensor Replacement in Front Suspension.
    3. Fig 2: View Of Disc Brake Splash Shield
    GM1363833Courtesy of GENERAL MOTORS CORP.
  3. Remove the disc brake splash shield.
About FixVault