Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Support the lower control arms at curb height.

Fig 1: View Of Stabilizer Shaft Link Assemblies

Courtesy of GENERAL MOTORS CORP.

Install the link assemblies.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the nuts to the link assemblies.
Tighten: Tighten the nut to 44 N.m (32 lb ft).
Lower the vehicle.