Charge Indicator Inoperative
Charge Indicator Inoperative
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle |
| 2 | Turn ON the ignition, with the engine OFF observe the charge indicator on the instrument panel cluster (IPC). Is the charge indicator illuminated? |
Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
| 3 | Replace the IPC. Refer to Control Module References
for replacement, setup and programming. Did you complete the replacement? |
Go to Step 4 | - |
| 4 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 2 |