FixVault
Home › Hummer › 2007 › H3 Standard › Repair and Diagnosis › External Pages › Different car › Section 16 (Engine Control System - 2.8L (LK5) - Introduction) › Repair Instructions › Air Cleaner Assembly Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of MAF/IAT Sensor
    GM1352006Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.
    2. Fig 2: View Of Air Cleaner Assembly
    GM1352017Courtesy of GENERAL MOTORS CORP.
  2. Loosen the clamp and disconnect the air cleaner outlet duct from the air cleaner assembly.
  3. Remove the 2 bolts (3) and nut (5) securing the air cleaner assembly to the wheel house (4).
  4. Remove the air cleaner assembly from the vehicle.
About FixVault