FixVault
Home › Hummer › 2007 › H3 Standard › Repair and Diagnosis › External Pages › Different car › Section 33 (Frame And Underbody) › Repair Instructions › Engine Protection Shield Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Protection Shield
    GM1253074Courtesy of GENERAL MOTORS CORP.
  1. Remove the frame to the shield bolts.
  2. Remove the shield from the vehicle.
About FixVault