FixVault
Home › Hummer › 2007 › H3 Standard › Repair and Diagnosis › External Pages › Different car › Section 43 (HVAC Systems - Manual) › Repair Instructions › Mode Control Cable Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Temperature Cable & Mode Cable
    GM1273258Courtesy of GENERAL MOTORS CORP.
  1. Install the mode cable (3).

    Make certain that the cable is properly seated in the notches in the HVAC control assembly (6).

  2. Install the mode cable (3) to the HVAC control assembly (6).
  3. Install the mode cable to the retaining clip.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the mounting screws to the HVAC control assembly.

    Tighten:  Tighten the screws to 1.9 N.m (17 lb in)

  5. Install the radio. Refer to Radio Replacement in Entertainment.
    6. Fig 2: View Of Mode Cam, Mode Cable, Screw & Retaining Clip
    GM1273255Courtesy of GENERAL MOTORS CORP.
  6. Install the mode cable (4) to the mode control cam (2).
  7. Install the mode cable (4) to the retaining clip (3).
  8. Install the radio. Refer to Radio Replacement in Entertainment.
  9. Install the HVAC control assembly. Refer to HVAC Control Assembly Replacement .
About FixVault