FixVault
Home › Hummer › 2007 › H3 Standard › Repair and Diagnosis › External Pages › Different car › Section 43 (HVAC Systems - Manual) › Repair Instructions › Mode Control Cable Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the radio. Refer to Radio Replacement in Entertainment.
  2. Remove the mounting screws from the HVAC control assembly.
    3. Fig 1: View Of Mode Cam, Mode Cable, Screw & Retaining Clip
    GM1273255Courtesy of GENERAL MOTORS CORP.
  3. Remove the mode cable (4) from the retaining clip (3) and remove the mode cable.
  4. Remove the mode cable (4) from the mode control cam.
    5. Fig 2: View Of Temperature Cable & Mode Cable
    GM1273258Courtesy of GENERAL MOTORS CORP.
  5. Remove the mode cable (3) from the HVAC control assembly (6).
  6. Remove the mode control cable.
About FixVault