Installation Procedure

Fig 1: Exploded View Of Clutch Release Switch

Courtesy of GENERAL MOTORS CORP.

Slide the clutch pedal position switch (3) with retaining plate (2) into the clutch pedal bracket (1), until the locking tabs (2) are fully engaged.

Fig 2: View Of Clutch Release Switch Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector (2) to the clutch pedal position switch (1).
Complete the following in order to adjust the clutch pedal position switch (1).
1. Push the switch fully into the bracket, allowing the switch to ratchet in the retaining plate.
2. Depress the clutch pedal all the way to the floor.