FixVault
Home › Hummer › 2008 › H2 4D Utility Pickup › Repair and Diagnosis › Body & Frame › Door Locks › Vehicle Access › Repair Instructions › Midgate Latch Switch Replacement › Installation Procedure

Installation Procedure

    Fig 1: Midgate Inner Panel
    GM1427709Courtesy of GENERAL MOTORS CORP.
  1. Install the latch release switch to the hole in the midgate inner panel.
  2. Press the latch release switch (2) in until all the retaining tabs are fully seated.
  3. Connect the electrical connector (3) to the latch release switch.
    4. Fig 2: Midgate Inner Panel
    GM1412513Courtesy of GENERAL MOTORS CORP.
  4. Install the midgate inner panel. Refer to Midgate Inner Panel Replacement .
About FixVault