Component Testing

Midgate Window Switch

1. Ignition OFF, disconnect the harness connector at the midgate window switch.
2. Test for infinite resistance between the signal terminals B and C and the ignition terminal A with the switch in the INACTIVE position.
   • If less than the specified value, replace the midgate window switch.
3. Test for less than 2-ohms between the signal terminal C and the ignition terminal A with the switch in the UP position.
   • If greater than the specified range, replace the midgate window switch.
4. Test for less than 2-ohms between the signal terminal B and the ignition terminal A with the switch in the DOWN position.
   • If greater than the specified range, replace the midgate window switch.