Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Install a new washer pump grommet into the container.
Lubricate the washer pump pickup with clean washer solvent.

Fig 1: Identifying Washer Pump

Courtesy of GENERAL MOTORS CORP.

Install the washer pump in the washer solvent container - gentle pressure is required.

Fig 2: Washer Solvent Level Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Install the washer solvent container (5). Refer to Washer Solvent Container Replacement .