Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Wiper Transmission Bolts & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Align the wiper transmission to vehicle.

NOTE: Refer to Fastener Notice .

Install the bolts (1) retaining the wiper transmission to the vehicle.
Tighten: Tighten the bolts to 9 N.m (7 lb ft).
Connect the wiper motor electrical connector (2).
Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
Engage wipers and check for proper operation.