FixVault
Home › Hummer › 2008 › H2 4D Utility Pickup › Repair and Diagnosis › External Pages › Different car › Section 13 (Supplemental Inflatable Restraints) › Repair Instructions › Inflatable Restraint Instrument Panel Module Disable Switch Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the I/P module switch electrical connector.
    2. Fig 1: I/P Module Switch
    GM412186Courtesy of GENERAL MOTORS CORP.
  2. Install the I/P module switch into the lower right opening of the switch plate panel.
  3. Install the instrument panel trim bezel. Refer to Instrument Cluster Trim Panel Replacement .
About FixVault