Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Record the lock code before removal, if equipped.

Loosen and move the center console reward for access to the center trim panel. Refer to Console Replacement .
Remove the screws that hold the trim plate - instrument panel (I/P) center from I/P. Refer to Instrument Panel Center Trim Panel Replacement .

Fig 1: Radio & I/P Center Stack

Courtesy of GENERAL MOTORS CORP.

Remove the bolts that hold the radio to the I/P center stack.

Fig 2: Electrical Connectors & Antenna Connectors

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connectors and the antenna connections from the rear of the radio.

Fig 3: Identifying Radio

Courtesy of GENERAL MOTORS CORP.

Remove the radio.