Midgate Window Learn Cycle: Initialization
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
This procedure is used after a new motor/module assembly is installed or any other midgate service which required the de-initialization to be performed.
- Turn the ignition ON.
- Press and hold the IP midgate window switch in the DOWN position.
- Continue to hold the switch in the DOWN position for 1 second after the end of travel is reached.
- Press and hold the IP midgate window switch in the UP position.
- Continue to hold the switch in the UP position for 1 second after the end of travel is reached.