Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Midgate Window Regulator Components

Courtesy of GENERAL MOTORS CORP.

Install the window regulator to the midgate.
Connect the window regulator electrical connector (1).

Fig 2: Midgate Window Regulator

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the nuts retaining the window regulator to the midgate.
Tighten: Tighten the window regulator nuts to 25 N.m (18 lb ft).
Install the midgate window. Refer to Midgate Window Replacement .
Inspect and adjust the midgate window alignment to the weatherstrip channel. Refer to Midgate Window Replacement .
Install the midgate inner panel. Refer to Midgate Inner Panel Replacement .