Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Install the lumbar switch to the power seat switch bezel.

NOTE: Refer to Fastener Notice .

Install the lumbar switch screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).

Fig 1: View Of Lumbar Switch & Power Seat Switch Bezel

Courtesy of GENERAL MOTORS CORP.

Install the power seat switch bezel (1) to the seat. Refer to Seat Switch Bezel Replacement .