FixVault
Home › Hummer › 2008 › H2 4D Utility Pickup › Repair and Diagnosis › External Pages › Different car › Section 8 (Lighting) › Repair Instructions › Stop Lamp Switch Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Pedal Stud, Stop Lamp Switch, Pushrod & Retaining Clip
    GM344194Courtesy of GENERAL MOTORS CORP.
  1. Install the stop lamp switch (2).
  2. Install the pushrod retaining clip (4).
  3. Connect the electrical connector to the stop lamp switch (2).
About FixVault