FixVault
Home › Hummer › 2008 › H3 Alpha › Repair and Diagnosis › External Pages › Different car › Section 101 (Lighting Systems) › Repair Instructions › Ambient Light Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (I/P) trim pad. Refer to Instrument Panel Trim Pad Replacement .
  2. Remove the ambient light sensor wire harness connector.
    3. Fig 1: Identifying Light Sensor
    GM1207745Courtesy of GENERAL MOTORS CORP.
  3. Remove the ambient light sensor.
About FixVault