FixVault
Home › Hummer › 2008 › H3 Alpha › Repair and Diagnosis › External Pages › Different car › Section 106 (Supplemental Inflatable Restraint System) › Repair Instructions › Inflatable Restraint Side Impact Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the roof rail SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
    3. Fig 1: Identifying Side Impact Sensor Electrical Connector
    GM1345186Courtesy of GENERAL MOTORS CORP.
  3. Remove the fasteners securing the sensor to the vehicle and remove the sensor from the vehicle.
  4. Disconnect the electrical connector.
About FixVault