FixVault
Home › Hummer › 2008 › H3 Alpha › Repair and Diagnosis › External Pages › Different car › Section 138 (Rear Suspension System) › Repair Instructions › Coil Spring Insulators Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Coil Spring Insulator And Lower Control Arm
    GM1236976Courtesy of GENERAL MOTORS CORP.
  1. Install the coil spring insulators to the lower control arm and vehicle body.
  2. Install the coil spring. Refer to Coil Spring Replacement .
  3. Lower the vehicle.
About FixVault