FixVault
Home › Hummer › 2008 › H3 Alpha › Repair and Diagnosis › External Pages › Different car › Section 182 (HVAC System - Automatic) › Repair Instructions › Sun Load Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the sunload sensor electrical connector.
    2. Fig 1: View Of Sunload Sensor
    GM788963Courtesy of GENERAL MOTORS CORP.
  2. Install the sunload sensor to the defroster grille by twisting the sensor 1/4 turn clockwise.
  3. Install the defroster grille. Refer to Defroster Grille Replacement .
About FixVault