FixVault
Home › Hummer › 2008 › H3 Base, Automatic › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting › Repair Instructions › Stop Lamp Switch Replacement › Installation Procedure

Installation Procedure

  1. Position the switch near the bracket.
  2. Ensure the switch key-way is properly indexed to the plastic retainer.
  3. Install and adjust the switch. Refer to Stop Lamp Switch Adjustment .
    4. Fig 1: View Of Stop Lamp Electrical Connectors
    GM1607450Courtesy of GENERAL MOTORS CORP.
  4. Connect the stop lamp switch electrical connectors (1).
  5. Check the switch for proper operation.
About FixVault